- Ensure the artificial grass pile is upright to allow most effective infiltration of infill material. Hand or power broom the fibres upright if required.
Brushing the grass upright
Distributing the infill sand - The artificial grass should be infilled with alternating fine layers of kiln dried silica sand and granular rubber. Each infill layer should be brushed in by either a stiff brush or power broom to ensure even and deep spread of infill material.
- Repeat sand rubber layering and brushing in. Check specifications of the specific product, but most landscape grasses infill to approx 80% of the pile height. Finish by brushing entire surface.
Artificial Grass Tips
- Wet weather – take a break! Do not install or infill Green Planet Grass in wet weather.
- Use the specification sheets and ask for help as required.
- A wonderful surface requires a correctly constructed base.
- Green Planet Grass is perforated for vertical drainage but allow for horizontal drainage as well.
Disclaimer: These instructions are provided as a guide only. Advanced techniques and customised equipment used by experienced installers provide excellent results, even on difficult sites. Installation specifications vary widely within the industry – beware of short cuts compromising quality. As a well established supplier and installer of synthetic grass our instructions provide a guide to achieve a premium base and surfacing result.